Honeywell HL10CESWW Air Conditioner Manual

The Honeywell HL10CESWW is a portable air conditioner designed for cooling rooms up to 350 square feet. It features a 10,000 BTU cooling capacity, a dehumidifier function, and a fan-only mode. This unit is equipped with a digital display, remote control, and a programmable timer for convenience. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Portable design, digital display, remote control, programmable timer, dehumidifier function.

Feature	Description
10,000 BTU cooling capacity	Effective cooling for rooms up to 350 sq. ft.
Dehumidifier function	Removes excess moisture from the air.
Remote control	Convenient operation from a distance.
Digital display	Easy-to-read temperature and mode settings.
Programmable timer	Set the unit to turn on/off at specific times.
Fan-only mode	Circulates air without cooling.

Installation

Unpack and inspect contents. Place the unit near a window for venting.

Install the window vent kit: Follow the instructions to fit the kit to your window.
Connect the exhaust hose: Attach one end to the unit and the other to the window vent kit.
Plug into AC power: Ensure the outlet is grounded and suitable for the unit's power requirements.

WARNING! Ensure the unit is stable and secure during installation.

First-Time Setup

Power on the unit; follow the on-screen prompts.

Select cooling mode: Use the mode button to choose between cooling, fan, or dehumidifier.
Set desired temperature: Use the temperature controls to adjust to your comfort level.
Program timer: Set the timer for automatic on/off functionality.

CAUTION! Ensure the unit is placed in a well-ventilated area.

Specifications

Cooling Capacity: 10,000 BTU.
Room Size: Up to 350 sq. ft.
Power Supply: 115V/60Hz.
Air Flow: 200 CFM.
Noise Level: 52 dBA.
Weight: 65 lbs.
Dimensions: 15.4 x 18.1 x 30.5 inches.

Controls and Settings

Access settings via the digital display or remote control. Controls include power, mode selection, temperature adjustment, and timer settings.

Remote: Power, mode, temperature up/down, timer, fan speed.

Connecting Devices

Ensure the unit is properly vented before connecting any additional devices.

Turn off the unit before connecting any accessories.
Follow the manufacturer's instructions for any additional devices.

Tip: Regularly check the exhaust hose for any blockages.

Operating the Air Conditioner

To operate, simply power on the unit and select your desired mode and temperature.

Press the power button to turn on.
Select cooling mode and adjust the temperature.
Use the fan speed setting for additional comfort.

WARNING! Do not block the air intake or exhaust.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean the filter every month.

CAUTION! Unplug the unit before performing any maintenance.

Regulatory Information

This air conditioner complies with all applicable safety standards and regulations. For support, visit www.honeywell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power	Check power supply and connections.
No cooling	Incorrect mode	Ensure unit is set to cooling mode.
Excessive noise	Blocked air intake	Check for obstructions and clean filters.
Water leakage	Full water tank	Empty the water tank and check for blockages.

Reset: Unplug the unit for 5 minutes to reset.

Service: For assistance, contact Honeywell customer support.