Honeywell HL14 Air Conditioner Manual

The Honeywell HL14 is a portable air conditioner designed to provide efficient cooling for rooms up to 700 square feet. It features a dual-hose system for better airflow, a built-in dehumidifier, and a programmable timer. The unit operates quietly and comes with a remote control for convenient operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Dual-hose system, Remote Control, Built-in dehumidifier, Programmable timer, Adjustable fan speeds.

Feature	Description
Dual-hose system	Improves cooling efficiency and reduces energy consumption
Remote control	Allows for easy operation from a distance
Programmable timer	Set the unit to turn on or off at specific times
Built-in dehumidifier	Reduces humidity levels for added comfort
Adjustable fan speeds	Customize airflow according to your preference

Installation

Unpack and inspect contents. Place the unit on a stable surface near a window.

Install the window kit: Follow the instructions to fit the kit to your window size.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into AC power: Ensure the outlet is grounded and suitable for the unit.

WARNING! Ensure the unit is stable and secure to avoid tipping.

First-Time Setup

Power on the unit; follow the remote control instructions.

Select cooling mode: Use the mode button on the remote to choose cooling.
Set desired temperature: Adjust the temperature using the up/down buttons.
Program timer: Use the timer function to set operation times.

CAUTION! Ensure the unit is properly installed before operation.

Specifications

Cooling Capacity: 14,000 BTU.
Room Size: Up to 700 sq. ft.
Power Supply: 115V/60Hz.
Air Flow: 400 CFM.
Noise Level: 52 dBA.
Weight: 80 lbs.
Dimensions: 15.5 x 18.1 x 30.5 inches.

Controls and Settings

Access settings via the remote control or control panel on the unit. Functions include cooling mode, fan speed, temperature adjustment, and timer settings.

Connecting Devices

No external devices are required for operation. Ensure the unit is connected to a suitable power outlet.

Operating the Air Conditioner

To operate, simply power on the unit and select your desired settings using the remote control.

Press the power button to turn on.
Select cooling mode and adjust temperature.
Use the fan speed settings for desired airflow.

WARNING! Do not block air intake or exhaust vents.

Maintenance and Care

Regularly clean the air filter and ensure the unit is free from dust and debris.

CAUTION! Unplug the unit before performing any maintenance.

Regulatory Information

This unit complies with FCC regulations and is certified for residential use. For support, visit www.honeywell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power supply	Check power outlet and connections.
No cooling	Improper installation	Ensure exhaust hose is properly connected.
Excessive noise	Loose parts	Check for loose components and tighten if necessary.
Water leakage	Full water tank	Empty the water tank and check for blockages.

Reset: Unplug the unit for 5 minutes to reset.

Service: 1-800-474-2147; www.honeywell.com