Honeywell HWAC-1217S Air Conditioner Manual

The Honeywell HWAC-1217S is a portable air conditioner designed to provide efficient cooling for rooms up to 400 square feet. It features a sleek design, easy-to-use controls, and multiple cooling modes, including fan and dehumidification settings. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, adjustable thermostat, multiple fan speeds, and a built-in dehumidifier.

Feature	Description
Portable Design	Easy to move from room to room.
Remote Control	Convenient operation from a distance.
Adjustable Thermostat	Customize your cooling preferences.
Multiple Fan Speeds	Choose the desired airflow level.
Built-in Dehumidifier	Reduces humidity for added comfort.

Installation

Unpack and inspect contents. Place the air conditioner on a flat surface near a window.

Install the window kit: Follow the instructions to secure the kit in the window.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into a power outlet: Ensure the outlet is grounded and can handle the unit's power requirements.

WARNING! Ensure the unit is stable and secure to avoid tipping.

First-Time Setup

Power on the air conditioner; follow the on-screen prompts.

Select cooling mode: Use the mode button to choose between cooling, fan, and dehumidification.
Set the desired temperature: Adjust the thermostat to your comfort level.
Adjust fan speed: Choose low, medium, or high based on your preference.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 12,000 BTU.
Room Size: Up to 400 square feet.
Power Supply: 115V/60Hz.
Energy Efficiency Ratio (EER): 12.0.
Weight: 70 lbs.
Dimensions: 30 x 18 x 15 inches.
Noise Level: 52 dB.

Controls and Settings

Access settings via the control panel or remote. Features include power, mode selection, temperature adjustment, and fan speed control.

Remote: Power, mode, temperature, fan speed, and timer settings.

Connecting to Power

Ensure the air conditioner is plugged into a dedicated outlet. Avoid using extension cords.

Check the power cord for damage before plugging in.
Use a grounded outlet to prevent electrical hazards.

Tip: Always unplug the unit when not in use.

Operating the Air Conditioner

To operate, press the power button and select your desired mode and settings.

Adjust temperature: Use the up and down arrows on the control panel or remote.
Change fan speed: Cycle through options using the fan button.
Set timer: Use the timer button to program on/off times.

WARNING! Do not block the air intake or exhaust vents.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean or replace the air filter every month.

CAUTION! Always unplug the unit before performing maintenance.

Regulatory Information

This air conditioner complies with all applicable safety standards. For support, visit www.honeywell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check outlet and power cord.
No cooling	Incorrect settings	Ensure cooling mode is selected and temperature is set low enough.
Excessive noise	Improper installation	Ensure unit is level and secure.
Water leakage	Full water tank	Empty the water tank and check for blockages.

Reset: Unplug the unit for 10 seconds to reset.

Service: For assistance, contact Honeywell customer service.