Honeywell HX2CESAWG8 Air Conditioner Manual

The Honeywell HX2CESAWG8 is a portable air conditioner designed to provide efficient cooling for spaces up to 400 square feet. It features a dual-hose system for improved efficiency, a programmable timer, remote control operation, and multiple cooling modes. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Dual-hose system, remote control, programmable timer, multiple cooling modes, and energy-saving features.

Feature	Description
Dual-hose system	Improves cooling efficiency by drawing in outside air for cooling.
Remote control	Convenient operation from a distance.
Programmable timer	Set the unit to turn on or off at specific times.
Multiple cooling modes	Cool, fan, and dehumidify modes for versatile use.
Energy-saving features	Helps reduce electricity consumption.

Installation

Unpack and inspect contents. Place the unit on a stable surface near a window.

Install the window kit: Follow instructions to secure the kit in the window.
Connect the exhaust hose: Attach the hose to the unit and window kit.
Plug into AC power: Ensure the outlet is grounded and suitable for the unit.

WARNING! Ensure proper ventilation and avoid blocking air intake/outlet.

First-Time Setup

Power on the unit; follow on-screen prompts on the remote control.

Select cooling mode: Use the mode button to choose between cool, fan, or dehumidify.
Set temperature: Adjust the desired temperature using the up/down buttons.
Program timer: Use the timer function to schedule operation times.

CAUTION! Ensure the unit is level for optimal performance.

Specifications

Cooling Capacity: 8,000 BTU.
Air Flow: 250 CFM.
Energy Efficiency Ratio (EER): 12.0.
Noise Level: 52 dB.
Power Supply: 115V/60Hz.
Weight: 60 lbs.
Dimensions: 15 x 18 x 30 inches.

Controls and Settings

Access settings via the remote control or control panel on the unit. Controls include power, mode selection, temperature adjustment, and timer settings.

Connecting Devices

Ensure the unit is connected to a suitable power outlet. No additional devices are required for operation.

Operating the Air Conditioner

Follow the instructions for optimal cooling performance.

Turn on the unit using the power button.
Select your desired cooling mode.
Adjust the temperature to your comfort level.
Use the fan speed settings as needed.

WARNING! Do not block air intake or exhaust vents.

Maintenance

Regular maintenance is essential for optimal performance. Clean or replace the air filter every month.

CAUTION! Unplug the unit before performing any maintenance.

Regulatory Information

This unit complies with FCC regulations for residential use. For support, visit www.honeywell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check power connection and outlet.
No cooling	Incorrect settings	Ensure unit is set to cool mode and temperature is set low enough.
Excessive noise	Improper installation	Ensure unit is level and not obstructed.
Water leakage	Full water tank	Empty the water tank and check for blockages.

Reset: Unplug the unit for 5 minutes to reset.

Service: Contact Honeywell customer service for assistance.