Honeywell MN10CESBB Air Conditioner Manual

The Honeywell MN10CESBB is a portable air conditioner designed to provide efficient cooling for rooms up to 350 square feet. It features a 10,000 BTU cooling capacity, a dehumidifier function, and a fan-only mode. The unit is equipped with a digital display, remote control, and a 24-hour programmable timer for convenience. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Maintenance 7. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, digital display, adjustable thermostat, and multiple fan speeds.

Feature	Description
10,000 BTU Cooling	Efficient cooling for rooms up to 350 sq. ft.
Dehumidifier Function	Removes excess moisture from the air.
Remote Control	Convenient operation from a distance.
Digital Display	Easy-to-read temperature and mode settings.
24-Hour Timer	Programmable timer for automatic operation.
Multiple Fan Speeds	Customize airflow to your preference.

Installation

Unpack the unit and ensure all components are included. Place the air conditioner near a window for easy venting.

Install the window kit: Follow the instructions to fit the kit into your window.
Connect the exhaust hose: Attach one end to the unit and the other to the window kit.
Plug into an AC outlet: Ensure the outlet is grounded and can handle the unit's power requirements.

WARNING! Ensure proper ventilation to avoid overheating. Do not block air intake or exhaust.

First-Time Setup

Power on the unit and follow the on-screen prompts to set your desired temperature and mode.

Select cooling mode: Press the mode button until the cooling icon is displayed.
Set the temperature: Use the up/down buttons to adjust the temperature setting.
Adjust fan speed: Choose between low, medium, or high fan settings.

CAUTION! Ensure the unit is level for optimal performance.

Specifications

Cooling Capacity: 10,000 BTU.
Room Size: Up to 350 sq. ft.
Power Supply: 115V/60Hz.
Air Flow: 220 CFM.
Dehumidification: Up to 50 pints per day.
Noise Level: 52 dBA.
Dimensions: 29.1 x 17.1 x 15.4 inches.

Controls and Settings

Access settings via the digital display or remote control. Key functions include power, mode selection, temperature adjustment, and fan speed control.

Remote: Power, Mode, Temperature Up/Down, Fan Speed, Timer.

Settings: Adjust temperature, select cooling or dehumidifying modes, and set the timer for automatic operation.

Maintenance

Regular maintenance is essential for optimal performance. Clean the air filter every month and ensure the exhaust hose is free from obstructions.

CAUTION! Always unplug the unit before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not cooling	Improper installation	Check window kit and exhaust hose connections.
Water leakage	Full water tank	Empty the water tank and ensure proper drainage.
Noise during operation	Loose parts	Tighten any loose components and ensure the unit is level.
Remote not working	Batteries	Replace batteries in the remote control.

Service: For further assistance, contact Honeywell customer support.