Honeywell MN10CHCED Air Conditioner Manual

The Honeywell MN10CHCED is a portable air conditioner designed to cool rooms up to 350 square feet. It features a powerful 10,000 BTU cooling capacity, a dehumidifier function, and a fan-only mode. The unit is equipped with a digital display, remote control, and a programmable timer for convenience. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Portable design, digital display, remote control, programmable timer, dehumidifier function.

Feature	Description
Cooling Capacity	10,000 BTU for rooms up to 350 sq. ft.
Dehumidifier	Removes up to 50 pints of moisture per day.
Fan Modes	Three fan speeds for customized comfort.
Remote Control	Convenient operation from a distance.
Programmable Timer	Set the unit to turn on/off at specific times.

Installation

Unpack and inspect contents. Choose a suitable location for the unit.

Attach the exhaust hose to the back of the unit.
Install the window kit according to the window type.
Plug the unit into a grounded outlet.
Ensure the unit is level for optimal performance.

WARNING! Ensure proper ventilation and avoid blocking air intake or exhaust.

First-Time Setup

Power on the unit; follow the on-screen prompts.

Select cooling mode using the mode button.
Set desired temperature using the temperature controls.
Adjust fan speed as needed.
Use the timer function to schedule operation.

CAUTION! Ensure the unit is properly installed before operation.

Specifications

Cooling Capacity: 10,000 BTU.
Room Size: Up to 350 sq. ft.
Dehumidification: Up to 50 pints per day.
Power Supply: 115V/60Hz.
Noise Level: 52 dBA.
Weight: 65 lbs.
Dimensions: 15.4 x 16.5 x 30.7 inches.

Controls and Settings

Access controls via the digital display or remote control. Settings include temperature adjustment, fan speed, and mode selection.

Remote: POWER, MODE, FAN, TEMP UP/DOWN, TIMER.

Adjust settings for optimal comfort based on your preferences.

Connecting to Power

Ensure the unit is plugged into a dedicated outlet. Avoid using extension cords.

Check the power supply voltage.
Plug the unit into a grounded outlet.
Ensure the power cord is not damaged.

Tip: Use a surge protector for added safety.

Operating the Air Conditioner

Use the remote or control panel to operate the unit.

Press POWER to turn on the unit.
Select the desired mode (cool, fan, dehumidify).
Adjust the temperature and fan speed as needed.
Monitor the digital display for settings.

WARNING! Do not block air intake or exhaust vents.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the air filter every month and replace it as needed. Ensure the exhaust hose is free from obstructions.

Regulatory Information

This product complies with FCC regulations and safety standards. For support, visit www.honeywell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power	Check power supply and connections.
No cooling	Incorrect settings	Ensure unit is set to cooling mode.
Excessive noise	Obstructions	Check for blockages around the unit.
Water leakage	Full water tank	Empty the water tank and check for clogs.

Reset: Unplug the unit for 5 minutes to reset.

Service: For assistance, contact Honeywell customer service.