Honeywell MN13CHESBB-R Air Conditioner Manual

The Honeywell MN13CHESBB-R is a portable air conditioner designed for cooling rooms up to 450 square feet. It features a 13,000 BTU cooling capacity, a dehumidifier function, and a fan-only mode. The unit is equipped with a digital display, remote control, and a programmable timer for convenience. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Portable design, digital controls, remote control, adjustable air vents, and a washable filter.

Feature	Description
Cooling Capacity	13,000 BTU for effective cooling
Dehumidifier Function	Removes excess moisture from the air
Fan-Only Mode	Circulates air without cooling
Digital Display	Easy-to-read control panel
Remote Control	Convenient operation from a distance
Programmable Timer	Set the unit to turn on/off automatically
Washable Filter	Easy to clean and maintain

Installation

Unpack and inspect contents. Place the unit on a flat surface near a window.

Install the window kit: Follow the instructions to fit the kit into your window.
Connect the exhaust hose: Attach the hose to the back of the unit and the window kit.
Plug into AC power: Ensure the outlet is grounded.

WARNING! Ensure proper ventilation; do not block air intake or exhaust.

First-Time Setup

Power on the unit; follow the on-screen prompts.

Set the desired temperature using the digital controls.
Select the mode: Cool, Fan, or Dehumidify.
Adjust the fan speed as needed.

CAUTION! Ensure the unit is level to avoid water leakage.

Specifications

Cooling Capacity: 13,000 BTU.
Room Size: Up to 450 sq. ft.
Power Supply: 115V/60Hz.
Air Flow: 350 CFM.
Noise Level: 52 dB.
Weight: 70 lbs.
Dimensions: 15.5 x 18.1 x 30.5 inches.

Controls and Settings

Access settings via the digital display or remote control. Features include temperature adjustment, mode selection, and fan speed control.

Remote: Power, Mode, Temperature Up/Down, Fan Speed, Timer.

Connecting Devices

The air conditioner is a standalone unit and does not require additional devices for operation.

Operating the Air Conditioner

To operate, press the power button, select the mode, and set the desired temperature.

Press the power button to turn on.
Select the cooling mode.
Adjust the temperature and fan speed as desired.

WARNING! Do not block the air intake or exhaust vents.

Maintenance and Care

Regularly clean the filter and check for any blockages in the air intake and exhaust.

CAUTION! Unplug the unit before performing any maintenance.

Regulatory Information

This unit complies with all applicable safety standards and regulations. For support, visit www.honeywell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check the power outlet and ensure the unit is plugged in.
No cooling	Incorrect settings	Ensure the unit is set to cooling mode and the temperature is set lower than the room temperature.
Water leakage	Improper installation	Ensure the unit is level and the drain is not blocked.
Excess noise	Blocked air intake	Check for obstructions and clean the filter.

Reset: Unplug the unit for 5 minutes to reset.

Service: For assistance, contact Honeywell customer service.