Honeywell MP09CESBB Air Conditioner Manual

The Honeywell MP09CESBB is a portable air conditioner designed for cooling and dehumidifying spaces up to 350 square feet. It features a sleek design, easy-to-use controls, and multiple cooling settings. This unit is equipped with a built-in dehumidifier, a remote control, and a programmable timer for convenience. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Portable design, remote control, built-in dehumidifier, adjustable fan speeds, programmable timer.

Feature	Description
Portable Design	Easy to move from room to room
Remote Control	Convenient operation from a distance
Built-in Dehumidifier	Reduces humidity levels for comfort
Adjustable Fan Speeds	Customize airflow to your preference
Programmable Timer	Set the unit to turn on/off automatically

Installation

Unpack the air conditioner and inspect for damage. Place it near a window for easy venting.

Install the window venting kit according to the instructions.
Plug the unit into a grounded outlet.
Ensure the air filter is installed properly.
Turn on the unit and select your desired settings.

WARNING! Ensure the unit is placed on a flat surface to avoid tipping.

First-Time Setup

Power on the air conditioner and follow the on-screen prompts.

Select cooling mode: Press the mode button to choose between cooling, fan, and dehumidifier modes.
Set the desired temperature using the temperature controls.
Adjust fan speed as needed.
Use the timer function to schedule operation times.

CAUTION! Ensure the unit is properly vented to avoid overheating.

Specifications

Cooling Capacity: 9,000 BTU.
Dehumidification: Up to 50 pints per day.
Air Flow: Adjustable fan speeds.
Power Supply: 115V, 60Hz.
Weight: Approximately 70 lbs.
Noise Level: 52 dB (low setting).
Operating Temperature: 61°F to 95°F.

Controls and Settings

Access settings via the control panel or remote. Features include power, mode selection, temperature adjustment, and fan speed control.

Remote: Power, mode, temperature, fan speed, timer.

Settings: Adjust temperature, select cooling mode, set timer for automatic operation.

Connecting Devices

Ensure the air conditioner is plugged into a suitable outlet. No additional devices are required for operation.

Check that the power outlet is functional.
Use the remote control for operation.

Tip: Keep the remote control within reach for convenience.

Operating the Air Conditioner

To operate, simply power on and select your desired settings. Monitor the temperature and adjust as necessary.

Press the power button to turn on.
Select the cooling mode and set the temperature.
Adjust fan speed for comfort.
Use the timer function for scheduled operation.

WARNING! Do not block the air intake or exhaust vents.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean the air filter every month and ensure the unit is free of dust.

CAUTION! Always unplug the unit before performing maintenance.

Regulatory Information

This air conditioner complies with all applicable safety standards. For support, visit www.honeywell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check outlet and power cord.
No cooling	Incorrect settings	Ensure cooling mode is selected.
Excessive noise	Improper placement	Ensure unit is on a flat surface.
Water leakage	Full water tank	Empty the water tank.

Reset: Unplug the unit for 10 seconds to reset.

Service: 1-800-555-0199; www.honeywell.com