Honeywell MP10CESBB Air Conditioner Manual

The Honeywell MP10CESBB is a portable air conditioner designed for cooling small to medium-sized rooms. It features a 10,000 BTU cooling capacity, a dehumidifier function, and a fan-only mode. This unit is equipped with a digital display, remote control, and multiple cooling settings to ensure comfort in various conditions. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Portable design, digital controls, remote control, adjustable fan speeds, and a built-in dehumidifier.

Feature	Description
Cooling Capacity	10,000 BTU for effective cooling
Dehumidifier Function	Removes excess moisture from the air
Fan-Only Mode	Circulates air without cooling
Digital Display	Easy-to-read control panel
Remote Control	Convenient operation from a distance
Energy Efficiency	Designed to save energy while providing comfort
Portable Design	Wheels for easy movement between rooms
Filter Indicator	Alerts when filter needs cleaning

Installation

Unpack the air conditioner and inspect for any damage. Follow these steps for installation:

Choose a suitable location near a window for venting.
Install the window kit according to the instructions.
Connect the exhaust hose to the unit and the window kit.
Plug the unit into a grounded outlet.

WARNING! Ensure the unit is stable and secure to avoid tipping.

First-Time Setup

Power on the air conditioner and follow the on-screen prompts.

Select cooling mode using the remote or control panel.
Set the desired temperature using the up/down buttons.
Adjust fan speed as needed.
For dehumidifier mode, select the appropriate setting.

CAUTION! Ensure the unit is properly vented to avoid overheating.

Specifications

Cooling Capacity: 10,000 BTU.
Power Consumption: 1150 Watts.
Air Flow: 300 CFM.
Noise Level: 52 dBA.
Weight: 60 lbs.
Dimensions: 15 x 16 x 30 inches.
Refrigerant: R410A.
Operating Temperature: 60°F to 95°F.

Controls and Settings

Access settings via the digital display or remote control. Key controls include:

Modes: Cool, Fan, Dehumidify.

Temperature Settings: Adjustable from 60°F to 86°F.

Fan Speeds: High, Medium, Low.

Timer: Set on/off times for convenience.

Connecting Devices

No additional devices are required for operation. Ensure the unit is plugged into a suitable outlet.

Check power supply before connecting.
Use a surge protector for added safety.

Tip: Avoid using extension cords to prevent overheating.

Operating the Air Conditioner

To operate the air conditioner:

Press the power button to turn on.
Select the desired mode and temperature.
Adjust fan speed as needed.
Monitor the temperature and adjust settings accordingly.

WARNING! Do not block air intake or exhaust vents.

Maintenance and Care

Regular maintenance is essential for optimal performance:

Clean or replace the air filter monthly.
Wipe down the exterior with a damp cloth.
Check the exhaust hose for blockages.
Store in a cool, dry place during off-season.

Regulatory Information

This unit complies with FCC regulations and is certified for safety and efficiency. For support, visit www.honeywell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check outlet and power cord.
No cooling	Incorrect settings	Ensure unit is set to cooling mode.
Excessive noise	Blocked air intake	Clear any obstructions around the unit.
Water leakage	Full water tank	Empty the water tank and check for blockages.
Remote not working	Batteries	Replace batteries in the remote control.

Reset: Unplug the unit for 5 minutes to reset.

Service: For further assistance, contact Honeywell customer support.