Honeywell MP10CESWW Air Conditioner Manual

The Honeywell MP10CESWW is a portable air conditioner designed to provide efficient cooling for rooms up to 350 square feet. It features a 3-in-1 functionality, including cooling, dehumidifying, and fan modes. The unit is equipped with a digital display, remote control, and a programmable timer for convenience. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Portable design, digital display, remote control, adjustable thermostat, and multiple fan speeds.

Feature	Description
Portable Design	Easy to move from room to room
Digital Display	Shows current temperature and settings
Remote Control	Convenient operation from a distance
Adjustable Thermostat	Allows for precise temperature control
Multiple Fan Speeds	Customize airflow to your preference
Programmable Timer	Set the unit to turn on/off automatically

Installation

Unpack and inspect contents. Place the unit on a flat surface near a window.

Install the window kit: Follow the instructions to fit the kit into your window.
Connect the exhaust hose: Attach one end to the air conditioner and the other to the window kit.
Plug into AC power: Ensure the outlet is grounded.

WARNING! Ensure the unit is stable to avoid tipping over.

First-Time Setup

Power on the unit; follow the digital display prompts.

Select cooling mode: Use the mode button to choose between cooling, dehumidifying, and fan.
Set desired temperature: Adjust using the up/down buttons.
Program timer: Set the timer for automatic operation.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 10,000 BTU.
Room Size: Up to 350 sq. ft.
Power Consumption: 1150 watts.
Noise Level: 52 dBA.
Weight: 65 lbs.
Dimensions: 15.4 x 12 x 28.1 inches.
Refrigerant: R410A.

Controls and Settings

Access settings via the digital display or remote control. Controls include power, mode selection, temperature adjustment, and fan speed.

Remote: Power, mode, temperature, fan speed, timer.

Connecting Devices

No additional devices are required for operation. Ensure the unit is plugged into a standard electrical outlet.

Operating the Air Conditioner

To operate, simply power on the unit and select your desired settings using the controls.

Press the power button to turn on.
Select the cooling mode.
Adjust the temperature and fan speed as needed.

WARNING! Do not block the air intake or exhaust vents.

Accessibility Features

The unit is designed for ease of use, with large buttons and a remote control for convenience.

Care & Cleaning

Unplug before cleaning. Use a soft cloth to wipe the exterior; do not use harsh chemicals.

CAUTION! Ensure the unit is dry before plugging back in.

Regulatory Information

This unit complies with FCC regulations for residential use. For support, visit www.honeywell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check power connection and outlet.
No cooling	Incorrect settings	Ensure cooling mode is selected.
Excessive noise	Blocked air vents	Check for obstructions and clean vents.
Water leakage	Full water tank	Empty the water tank and check for blockages.

Reset: Unplug the unit for 5 minutes to reset.

Service: For assistance, contact Honeywell customer support.